Support Matrix
Table Of Contents
- Dell EMC PowerVault ME4 Series Storage System Support Matrix
- Introduction
- Supported data protocols
- Dell EMC PowerVault ME4 Series storage system rules
- Default IPv4 Settings for management ports
- Default IPv4 settings for iSCSI ports
- Supported RAID controller firmware
- Supported iSCSI software initiators
- Supported protocol offload (TOE/iSCSI) adapters
- Supported Fibre Channel and iSCSI SFP+ transceivers
- Supported SAS and Twinax direct-attach cables
- Supported physical disk drives
- Supported expansion enclosures
- Supported management software
- Supported operating systems
- Operating systems with ALUA support
- Supported device mapper software
- Supported SAS host bus adapters
- Supported Fibre Channel host bus adapters
- Supported Fibre Channel and iSCSI direct-attach configuration operating systems
- Dell EMC Storage Support Policy
Introduction
This document provides information about supported software and hardware for Dell EMC PowerVault ME4012, ME4024, and
ME4084 storage systems, and usage considerations, recommendations, and rules.
The Support Matrix contains the latest compatibility and interoperability information. If you observe inconsistencies between
this information and other documentation, consider this document superseding.
NOTE: Unless specified, all information in this document is applicable to the latest RAID controller firmware version
available at www.dell.com/support.
Topics:
• Changes to revision A15 of the Support Matrix
Changes to revision A15 of the Support Matrix
● Corrected errors in the supported physical disk drives chapter
● Updated the firmware versions for some supported physical disk drives
1
4 Introduction