Support Matrix
Table Of Contents
- Dell EMC PowerVault ME4 Series Storage System Support Matrix
- Introduction
- Supported data protocols
- Dell EMC PowerVault ME4 Series storage system rules
- Default IPv4 Settings for management ports
- Default IPv4 settings for iSCSI ports
- Supported RAID controller firmware
- Supported iSCSI software initiators
- Supported protocol offload (TOE/iSCSI) adapters
- Supported Fibre Channel and iSCSI SFP+ transceivers
- Supported SAS and Twinax direct-attach cables
- Supported physical disk drives
- Supported expansion enclosures
- Supported management software
- Supported operating systems
- Operating systems with ALUA support
- Supported device mapper software
- Supported SAS host bus adapters
- Supported Fibre Channel host bus adapters
- Supported Fibre Channel and iSCSI direct-attach configuration operating systems
- Dell EMC Storage Support Policy
Supported SAS host bus adapters
To download the latest supported version of the 12Gbps SAS HBA firmware and drivers for your specific server hardware
platform, go to www.dell.com/support.
NOTE:
● The Dell 12 Gbps SAS HBA is compatible only on the Dell PowerEdge 13th,14th, and 15th generation servers that have a
PCI Express (PCIe) x8 slot.
● This matrix lists HBAs that have been tested for use within the Dell EMC PowerVault ME4 Series Storage System
family environment. It is not implied that all of these HBAs and their driver/firmware stacks are supported by any or
all server vendors. You must ensure that the HBA and its associated drivers are included on the vendor's hardware
compatibility list. This recommendation also applies to Dell EMC PowerEdge server products. Inclusion in this document's
HBA compatibility tables should not be interpreted as that HBA and driver/firmware combination as being supported by
any vendor for use with their server products.
Table 19. Supported 12Gbps SAS HBAs
Vendor Model Dell Part Number
Dell 12 Gbps SAS HBA 2PHG9 (Full Height) T93GD (Low profile)
17
Supported SAS host bus adapters 27