Support Matrix
Table Of Contents
- Dell EMC PowerVault ME4 Series Storage System Support Matrix
- Introduction
- Supported data protocols
- Dell EMC PowerVault ME4 Series storage system rules
- Default IPv4 Settings for management ports
- Default IPv4 settings for iSCSI ports
- Supported RAID controller firmware
- Supported iSCSI software initiators
- Supported protocol offload (TOE/iSCSI) adapters
- Supported Fibre Channel and iSCSI SFP+ transceivers
- Supported SAS and Twinax direct-attach cables
- Supported physical disk drives
- Supported expansion enclosures
- Supported management software
- Supported operating systems
- Operating systems with ALUA support
- Supported device mapper software
- Supported SAS host bus adapters
- Supported Fibre Channel host bus adapters
- Supported Fibre Channel and iSCSI direct-attach configuration operating systems
- Dell EMC Storage Support Policy
Supported operating systems
Where clustering is supported by the operating system, it is also supported on Dell EMC PowerVault ME4 Series Storage
Systems, subject to the following limitations:
Windows Server 2012 R2 through Windows Server 2019
● Maximum iSCSI hosts is 64
● Maximum SAS hosts is 4
● Maximum FC hosts is 64
Table 17. Dell EMC PowerVault ME4 Series Operating System Support
Operating System SAS host
server
Fibre Channel
host server
iSCSI host
server
Notes & required hotfixes
Windows Server 2019
Standard server (Server Core* and
Desktop Experience)
The Microsoft MPIO feature
needs to be installed prior
to connecting to ME4 Series
Storage Systems.
BitLocker Drive Encryption is
not supported.
Datacenter server (Server Core* and
Desktop Experience)
The Microsoft MPIO feature
needs to be installed prior
to connecting to ME4 Series
Storage Systems.
BitLocker Drive Encryption is
not supported.
Windows Server 2016
Standard server (Server Core* and
Desktop Experience)
The Microsoft MPIO feature
needs to be installed prior
to connecting to ME4 Series
Storage Systems.
BitLocker Drive Encryption is
not supported.
Datacenter server (Server Core* and
Desktop Experience)
The Microsoft MPIO feature
needs to be installed prior
to connecting to ME4 Series
Storage Systems.
BitLocker Drive Encryption is
not supported.
Windows Server 2012 R2 (U1)
Standard edition (Server Core* mode
supported)
The Microsoft MPIO feature
needs to be installed prior
to connecting to ME4 Series
Storage Systems.
BitLocker Drive Encryption is
not supported.
Datacenter edition (Server Core*
mode supported)
The Microsoft MPIO feature
needs to be installed prior
14
22 Supported operating systems