Support Matrix
Table Of Contents
- Dell EMC PowerVault ME4 Series Storage System Support Matrix
- Introduction
- Supported data protocols
- Dell EMC PowerVault ME4 Series storage system rules
- Default IPv4 Settings for management ports
- Default IPv4 settings for iSCSI ports
- Supported RAID controller firmware
- Supported iSCSI software initiators
- Supported protocol offload (TOE/iSCSI) adapters
- Supported Fibre Channel and iSCSI SFP+ transceivers
- Supported SAS and Twinax direct-attach cables
- Supported physical disk drives
- Supported expansion enclosures
- Supported management software
- Supported operating systems
- Operating systems with ALUA support
- Supported device mapper software
- Supported SAS host bus adapters
- Supported Fibre Channel host bus adapters
- Supported Fibre Channel and iSCSI direct-attach configuration operating systems
- Dell EMC Storage Support Policy
Supported Fibre Channel and iSCSI SFP+
transceivers
This following table lists the Fibre Channel and iSCSI transceivers that have been tested for use with Dell EMC PowerVault ME4
Series Storage Systems:
Table 8. Supported Fibre Channel and iSCSI SFP+ transceivers
Description Manufacturer Part
Number
Dell Part Number
16 Gb SFP+ short-wavelength transceiver (FC) FTLF8529P3BCVA TDTCP
16 Gb SFP+ short-wavelength transceiver (FC) FTLF8529P4BCV-D2 NKX77
16 Gb SFP+ short-wavelength transceiver (FC) AFBR-57F5MZ-FT2 NKX77
10GBASE-SR 850 nm SFP+ short-range transceiver (iSCSI) FTLX8574D3BCL-DL C5RNH
10GBASE-SR 850 nm SFP+ short-range transceiver (iSCSI) AFBR-709SMZ-FT2 C5RNH
9
16 Supported Fibre Channel and iSCSI SFP+ transceivers