Owners Manual

● If the slot number is known, see 5U84 enclosure system - plan view of drawer accessed from front panel on page 16,

which provides a view of a drawer that is dual-indexed with top drawer (left integer) and bottom drawer (right integer)

slot numbering.

● If the disk drive has failed, a fault LED is lit on the front panel of the affected drawer.

● If the disk drive has failed, the Drive Fault LED on the DDIC is lit amber.

2. Open the drawer that contains the DDIC to remove.

3. Unlock the DDIC from its seated position in the slot by pushing the latch button in the direction shown in the following

figure:

Figure 51. Removing a DDIC (1 of 2)

4. Pull the DDIC upwards and out of the drawer slot.

Figure 52. Removing a DDIC (2 of 2)

Installing a replacement 2.5" disk drive into a new DDIC

Each replacement disk drive is shipped with new disk drive in carrier (DDIC).

Install the replacement disk drive in the new DDIC before opening the drawer of the enclosure to remove the failed drive.

1. Install the 2.5" replacement disk drive into the 3.5" adapter.

Module removal and replacement