Owners Manual

Replacing an LFF drive carrier module
The replacement procedures for LFF drive carrier modules are the same for SFF modules, except that the LFF drive carrier
modules are mounted horizontally.
Removing an LFF drive carrier module
Perform the following steps to remove an LFF drive carrier module from a 2U enclosure:
1. Press the latch on the drive module carrier to open the handle.
Figure 38. Removing an LFF drive carrier module (1 of 2)
2. Gently move the drive carrier module approximately 25 mm (1 in.), and then wait 30 seconds for the drive to spin down.
Figure 39. Removing an LFF drive carrier module (2 of 2)
3. Remove the drive carrier module from the drive slot.
CAUTION:
To ensure optimal cooling throughout the enclosure, blank drive carrier modules must be installed
in all unused drive slots.
48 Module removal and replacement