Owners Manual

Electromagnetic compatibility (EMC) compliance
Table 42. EMC compliance standards
System product type
approval
Standards
Conducted emissions limit
levels
CFR47 Part 15B Class A
EN 55032
CISPR Class A
Radiated emissions limit levels CFR47 Part 15B Class A
EN 55032
CISPR Class A
Harmonics and flicker EN 61000-3-2/3
Immunity limit levels EN 55024
AC power cable specifications
Table 43. United States of America – Must be NRTL Listed (National Recognized Test Laboratory – e.g.,
UL)
Chassis form factor 2U12/2U24 5U84
Cable type SV or SVT, 18 AWG minimum, 3 conductor,
2.0 M max length
SJT or SVT, 12 AWG minimum, 3 conductor
Plug (AC source)
● NEMA 5–15P grounding-type
attachment plug rated 120V, 10A
● IEC 320, C14, 250V, 10A
● IEC 320, C20, 250V, 20A
● A suitable plug rated 250V, 20A
Socket IEC 320, C13, 250V, 10A IEC 320, C19, 250V, 20A
Table 44. Europe and others – General requirements
Chassis form factor 2U12/2U24 5U84
Cable type Harmonized, H05VV-F-3G1.0 Harmonized, H05VV-F-3G2.5
Plug (AC source)
● IEC 320, C14, 250V, 10A
● A suitable plug rated 250V, 16A
● IEC 320, C20, 250V, 16A
● A suitable plug rated 250V, 16A
Socket IEC 320, C13, 250V, 10A IEC 320, C19, 250V, 16A
NOTE: The plug and the complete power cable assembly must meet the standards appropriate to the country, and must
have safety approvals acceptable in that country.
Recycling of Waste Electrical and Electronic Equipment
(WEEE)
At the end of the product’s life, all scrap/waste electrical and electronic equipment should be recycled in accordance with
national regulations applicable to the handling of hazardous/toxic electrical and electronic waste materials.
Contact your supplier for a copy of the Recycling Procedures applicable to your country.
NOTE:
Observe all applicable safety precautions detailed in the preceding chapters (weight restrictions, handling batteries
and lasers, and so on) when dismantling and disposing of this equipment.
162 Standards and regulations