Owners Manual

Table 27. Event descriptions and recommended actions (continued)
Number Severity Description/Recommended actions
Recommended actions:
● No action is required.
414 Error A request to create a replication set failed.
This operation is not permitted if the specified volume is already in a replication set or is not a
master volume.
Recommended actions:
● If the volume is a master volume and is not in a replication set, retry the operation.
415 Info. A request to delete a replication set completed successfully.
Recommended actions:
● No action is required.
416 Error A request to delete a replication set failed.
This can occur if an invalid identifier was specified for the replication set, or if the specified
primary volume is not in the local system.
Recommended actions:
● Repeat the deletion using a valid replication-set identifier, or on the local system for the
primary volume.
417 Info. A snapshot was deleted.
● To make space for a remote snapshot proxy volume.
● To make space for a new snapshot.
● While changing a secondary volume to a primary volume.
● To make space for a new snapshot because the maximum number of snapshots per volume
was reached.
● To make space for a new snapshot because the maximum number of replication snapshots
per system was reached.
● To make space for an unknown reason.
A virtual snapshot was deleted because the user-specified snapshot space limit was exceeded.
Recommended actions:
● No action is required.
418 Warning A remote snapshot operation failed.
● Because the remote pool volume limit was reached.
● Because the remote controller volume limit was reached.
● Because the remote pool volume limit was reached.
● Because of an unknown reason.
A replication operation cannot complete because it needs to create a proxy volume and a
replication snapshot in the secondary pool, but the maximum number of volumes exists for that
pool or its owning controller and the pool contains no suitable snapshot to automatically delete.
This event is logged in the secondary volume's system only.
Recommended actions:
● To enable the replication operation to continue, delete at least one unneeded volume from
the destination pool or from another pool owned by the same controller. After performing the
above action, if the replication fails for the same reason and becomes suspended, events 431
and 418 will be logged. Repeat the above action and resume the replication.
● To allow additional volumes to be created in the future (standard volumes, replication
volumes, or snapshots), delete any unneeded volumes.
419 Info. A request to add a secondary volume started.
112 Events and event messages