Owners Manual
Table 27. Event descriptions and recommended actions (continued)
Number Severity Description/Recommended actions
This can occur when a snapshot is taken by an application, such as the VSS hardware provider,
that is timing-sensitive and needs to take a snapshot in two stages. After the snapshot is
committed and event 258 is logged, the snapshot can be used.
Recommended actions:
● No action is required.
257 Info. The indicated snapshot has been prepared and committed and is ready for use.
Recommended actions:
● No action is required.
258 Info A snapshot was committed for a volume. The snapshot is now ready for use.
Recommended actions:
● No action is required.
259 Info. In-band CAPI commands have been disabled.
Recommended actions:
● No action is required.
260 Info. In-band CAPI commands have been enabled.
Recommended actions:
● No action is required.
261 Info. In-band SES commands have been disabled.
Recommended actions:
● No action is required.
262 Info. In-band SES commands have been enabled.
Recommended actions:
● No action is required.
263 Warning The indicated spare disk is missing. Either it was removed or it is not responding.
Recommended actions:
● Replace the disk with one of the same type (SSD, enterprise SAS, or midline SAS) and the
same or greater capacity.
● Configure the disk as a spare.
266 Info. A volume-copy operation for the indicated master volume has been aborted by a user.
Recommended actions:
● No action is required.
267 Error A volume-copy operation completed with a failure.
This event has two variants:
1. If the source volume is a master volume, you can remount it. If the source volume is a
snapshot, do not remount it until the copy is complete (as indicated by event 268).
2. Possible causes are the pool running out of available space and crossing the high threshold,
volumes being unavailable, or general I/O errors.
Recommended actions:
● For variant 1: No action is required.
● For variant 2: Look for other events logged at approximately the same time that indicate a
pool space or volume failure. Follow the recommended actions for those events.
102 Events and event messages