Owners Manual
Table 27. Event descriptions and recommended actions (continued)
Number Severity Description/Recommended actions
247 Warning The FRU ID SEEPROM for the indicated field replaceable unit (FRU) cannot be read. FRU ID
data might not be programmed.
FRU ID data includes the worldwide name, serial numbers, firmware and hardware versions,
branding information, etc. This event is logged once each time a Storage Controller (SC) is
started for each FRU that is not programmed.
Recommended actions:
● Return the FRU to have its FRU ID data reprogrammed.
248 Info. A valid feature license was successfully installed. See event 249 for details about each licensed
feature.
Recommended actions:
● No action is required.
249 Info. After a valid license is installed, this event is logged for each licensed feature to show the new
license value for that feature. The event specifies whether the feature is licensed, whether the
license is temporary, and whether the temporary license is expired.
Recommended actions:
● No action is required.
250 Warning A license could not be installed.
The license is invalid or specifies a feature that is not supported on your product.
Recommended actions:
● Review the readme file that came with the license. Verify that you are trying to install the
license in the system that the license was generated for.
251 Info. A volume-copy operation has started for the indicated source volume.
Do not mount either volume until the copy is complete (as indicated by event 268).
Recommended actions:
● No action is required.
252 Info. Data written to a snapshot after it was created has been deleted.
The snapshot now represents the state of the parent volume when the snapshot was created.
Recommended actions:
● No action is required.
253 Info. A license was uninstalled.
Recommended actions:
● No action is required.
255 Info. The PBCs across controllers do not match as PBC from controller A and PBC from controller B
are from different vendors.
This may limit the available configurations.
Recommended actions:
● No action is required.
256 Info. A snapshot was created for a volume but it has not been committed yet.
An internal snapshot was created for a virtual replication volume but it has not been committed
yet.
Events and event messages 101