Deployment Guide

Table 32. iSCSI Subnet 1 (continued)
Item Information
IPv4 address for storage controller module B: port 0
_____ . _____ . _____ . _____
IPv4 address for storage controller module A: port 2
_____ . _____ . _____ . _____
IPv4 address for storage controller module B: port 2
_____ . _____ . _____ . _____
Table 33. iSCSI Subnet 2
Item Information
Subnet mask
_____ . _____ . _____ . _____
Gateway IPv4 address
_____ . _____ . _____ . _____
IPv4 address for storage controller module A: port 1
_____ . _____ . _____ . _____
IPv4 address for storage controller module B: port 1
_____ . _____ . _____ . _____
IPv4 address for storage controller module A: port 3
_____ . _____ . _____ . _____
IPv4 address for storage controller module B: port 3
_____ . _____ . _____ . _____
Gateway IPv6 address
________ :________ :________ :______::_____
Additional ME4 Series Storage System information
The Network Time Protocol (NTP) and Simple Mail Transfer Protocol (SMTP) server information is optional. The proxy server information
is also optional, but it may be required to complete the Discover and Configure Uninitialized text TBD wizard.
Table 34. NTP, SMTP, and Proxy servers
Item Information
NTP server IPv4 address
_____ . _____ . _____ . _____
SMTP server IPv4 address
_____ . _____ . _____ . _____
Backup NTP server IPv4 address
_____ . _____ . _____ . _____
SMTP server login ID
SMTP server password
Proxy server IPv4 address
_____ . _____ . _____ . _____
Fibre Channel zoning information
For a storage system with Fibre Channel front-end ports, record the physical and virtual WWNs of the Fibre Channel ports in fabric 1 and
fabric 2. This information is displayed on the Review Front-End page of the Discover and Configure Uninitialized wizard. Use this
information to configure zoning on each Fibre Channel switch.
Table 35. WWNs in fabric 1
Item FC switch port Information
WWN of storage controller A: port 0
WWN of storage controller B: port 0
96 System Information Worksheet