CLI Guide

show ports
reset pool-statistics
Description Clears resettable performance statistics for virtual pools, and resets timestamps for those statistics.
Minimum role manage
Syntax
reset pool-statistics
[pool]
Parameters
pool
Optional. The name or serial number of the virtual pool for which to reset statistics. A name that includes a
space must be enclosed in double quotes. If this parameter is omitted, statistics are reset for both pools A
and B.
Examples Reset statistics for pool A.
# reset pool-statistics A
See also
reset all-statistics
reset disk-error-statistics
reset controller-statistics
reset disk-group-statistics
reset host-port-statistics
reset pool-statistics
reset vdisks-statistics
reset volume-statistics
reset disk-statistics
show pool-statistics
show pools
reset smis-configuration
Description
Resets the SMI-S configuration files.
NOTE: This command is for use by or with direction from a service technician.
This command will reset the configuration of the SMI-S service to default settings. After running this
command, any hosts registered via SMI-S will need to be registered again.
Messages are displayed when the SMI-S configuration is reset and SMI-S is restarted.
Minimum role manage
Syntax
reset smis-configuration
[a|b|both]
[prompt yes|no]
[noprompt]
Parameters [a|b|both]Optional. The controller module containing the controller to restart. If this parameter is omitted,
the command affects the controller being accessed.
[prompt yes|no]
Optional. For scripting, this specifies an automatic reply to confirmation prompts:
96 Alphabetical list of commands