CLI Guide

show controller-statistics

show disk-group-statisticsshow disk-groups

reset disk-statistics

Description Resets performance statistics for disks.

This command resets basic disk statistics but not disk error statistics. To reset these, use the reset disk-

error-statistics command.

Lifetime statistics are not resettable.

Minimum role manage

Syntax

reset disk-statistics

Examples Reset statistics for all disks.

# reset disk-statistics

See also

reset all-statistics

reset disk-error-statistics

reset controller-statistics

reset disk-group-statistics

reset host-port-statistics

reset pool-statistics

reset vdisks-statistics

reset volume-statistics

show disk-statistics

reset dns-management-hostname

Description

Resets each controller module's management host name to the factory default.

The factory default is: <SCSI-vendor-ID><midplane-serial-number><controller-ID>.

Minimum role manage

Syntax

reset dns-management-hostname

[controller a|b|both]

Parameters

controller a|b|both

Optional. Specifies whether to change controller A, B, or both. If this parameter is omitted, changes affect

the controller being accessed.

Examples Reset the domain host name for controller A.

# reset dns-management-hostname controller a