CLI Guide

remote-port-address

Parameters remote-port-addressSpecifies the FC WWN or iSCSI IP address of the system to query. IPv4 and IPv6

formats are supported.

Output

Controller

• A: Controller A.

• B: Controller B.

Storage Controller Code Version

Storage Controller firmware version and loader version.

Management Controller Code Version

Management Controller firmware version and loader version.

IPv4 Address

Controller network port IPv4 address.

Peer Host Name

Controller network port IP address in the peer system.

IPv6 Address 1-4

Up to four IPv6 addresses configured for use, or Not Configured.

Port

The port ID.

Type

• FC: FC port.

• iSCSI: iSCSI port.

• Unknown: Port type is unknown

Port Health

• Up

• Down

• Degraded

• SFP Issue

• Unknown

Port Address

The assigned port address.

Reachable Local Links

The IDs of ports in the local system linked to ports in the remote system.

Examples

Query the system with an IP address of 192.168.200.22.

# query peer-connection 192.168.200.22

Basetypes

peer-connection-info

status