CLI Guide

Table 147. Settings changed by restore defaults (continued)
Setting Value
• Email server
• Email domain
• Email sender
• Include logs
• (none)
• (none)
• (none)
• Disabled
SSL/SSH certificates (preserved)
License (preserved)
Disk group metadata (preserved)
Host port settings:
• FC link speed
• FC topology
Settings:
• Auto
• Point-to-point
Host names and profiles (preserved)
Drive spin down Disabled
Advanced settings:
• Disk group background scrub
• Disk group background scrub interval
• Partner firmware upgrade
• Utility priority
• SMART
• Dynamic spare configuration
• Enclosure polling rate
• Host control of caching
• Sync cache mode
• Independent Cache mode
• Missing LUN response
• Controller failure
• Supercap failure
• CompactFlash failure
• Power supply failure
• Fan failure
• Temperature exceeded
• Partner notify
• Auto write back
• Inactive drive spin down
• Inactive drive spin down delay
• Disk background scrub
• Managed logs
• Single controller mode
• Auto stall recovery
• Restart on CAPI fail
• Large pools
Settings:
• Enabled
• 24 hours
• Enabled
• Low
• Enabled
• Disabled
• 5 seconds
• Disabled
• Immediate
• Disabled
• Illegal request
• Disabled
• Enabled
• Enabled
• Disabled
• Disabled
• Disabled
• Disabled
• Enabled
• Disabled
• 15 minutes
• Disabled
• Disabled
• Disabled (for a dual-controller system)
• Enabled
• Enabled
• Disabled
FDE settings
(preserved)
Peer connections (preserved)
Replication sets (preserved)
Enclosure settings:
• Name
• Location
Settings:
• (cleared)
• (cleared)
Settings changed by restore defaults 435