CLI Guide

Table 143. volumes properties (continued)
Name Type Description
• Performance: This setting prioritizes volume data to the higher performing tiers.
If no space is available, lower performing tier space is used. Performance affinity
volume data will swap into higher tiers based upon frequency of access or when
space is made available
tier-affinity-numeric uint32 Numeric equivalents for tier-affinity values.
• 0: No Affinity
• 1: Archive
• 2: Performance
snapshot string Shows whether the volume is a snapshot.
snapshot-retention-priority string The retention priority for snapshots of the volume.
• never-delete: Snapshots will never be deleted.
• high: Snapshots may be deleted after all eligible medium-priority snapshots have
been deleted.
• medium: Snapshots may be deleted after all eligible low-priority snapshots have
been deleted.
• low: Snapshots may be deleted.
Snapshots that are mapped or are not leaves of a volume's snapshot tree are not
eligible for automatic deletion.
snapshot-retention-priority-
numeric
uint32 Numeric equivalents for retention-priority values.
• 0: never-delete
• 1: high
• 2: medium
• 3: low
volume-qualifier string
• N/A: Not applicable.
raidtype string The RAID level of the disk group.
• NRAID
• RAID0
• RAID1
• RAID3
• RAID5
• RAID6
• RAID10
• RAID50
• ADAPT
raidtype-numeric uint32 Numeric equivalents for raidtype values.
• 0: RAID0
• 1: RAID1
• 2: ADAPT
• 3: RAID3
• 5: RAID5
• 6: NRAID
• 8: RAID50
• 10: RAID10
•
11: RAID6
cs-replication-role string
• Copy Source: The volume is the source for a volume copy operation.
API basetype properties 429