CLI Guide

Table 142. volume-reservations (continued)
Name Type Description
host-id string
• For an FC initiator, its WWPN.
• For a SAS initiator, its WWPN.
• For an iSCSI initiator, its node name (typically the IQN).
port string The controller host-port identifiers.
reserve-key string The reservation key, shown as a hexadecimal value.
reserve-scope string The reservation scope, Logical Unit .
reserve-scope- numeric uint32 Numeric equivalents for reserve-scope values.
• 0: Logical Unit
reserve-type string The reservation type.
• Undefined: The volume has no persistent reservations.
• Write Exclusive: Write commands are only allowed for a single reservation
holder.
• Exclusive Access: Certain access (read, write) commands are only allowed for
a single reservation holder.
• Write Exclusive - Registrants Only: Write commands are only allowed
for registered hosts. There is a single reservation holder.
• Exclusive Access - Registrants Only: Certain access (read, write)
commands are only allowed for registered hosts. There is a single reservation holder.
• Write Exclusive - All Registrants: Write commands are only allowed
for registered hosts. There is a single reservation holder.
• Exclusive Access - All Registrants: Certain access (read, write)
commands are only allowed for registered hosts. There is a single reservation holder.
reserve-type- numeric uint32 Numeric equivalents for reserve-type values.
• 0: Undefined
• 1: Write Exclusive
• 3: Exclusive Access
• 5: Write Exclusive - Registrants Only
• 6: Exclusive Access - Registrants Only
• 7: Write Exclusive - All Registrants
• 8: Exclusive Access - All Registrants
volumes
This basetype is used by show volumes and show volume-groups.
Table 143. volumes properties
Name Type Description
durable-id string Volume ID in the format V # , where # starts at 1 and increments for each new volume
to uniquely identify it. The value is generated from available data in the current CLI
session and may change after a Management Controller restart.
url string Volume URL.
virtual-disk-name string The name of the disk group or pool that contains the volume.
storage-pool-name string The name of the disk group or pool that contains the volume.
storage-pools-url string Pool URL.
volume-name string Volume name.
426 API basetype properties