CLI Guide

Table 129. unhealthy-component properties (continued)
Name Type Description
• 20: snapshot
• 21: host
• 25: volume map
• 26: system
component-id string Component identifier, such as A for controller A.
basetype string Component basetype.
primary-key string Durable ID of the component.
health string Component health.
• OK
• Degraded
• Fault
• Unknown
• N/A
health-numeric uint32 Numeric equivalents for health values.
• 0: OK
• 1: Degraded
• 2: Fault
• 3: Unknown
• 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended actions to take to resolve the health issue.
unused-disks-preview
This basetype is used by add storage on page 35 when the preview parameter is specified.
Table 130. unused-disks-preview properties
Name Type Description
location string Disk enclosure ID and slot number.
type string Disk description.
• SAS: Enterprise SAS spinning disk.
• SAS MDL: Midline SAS spinning disk.
• SSD SAS: SAS solid-state disk.
type-numeric uint32 Numeric equivalents for description values.
• 4: SAS
• 8: SSD SAS
• 11: SAS MDL
tier string
• Archive: The disk group is in the lowest storage tier, which uses midline spinning
SAS disks (<10k RPM, high capacity).
• Performance: The disk group is in the highest storage tier, which uses SSDs (high
speed).
• Read Cache: The disk is an SSD providing high-speed read cache for a storage
pool.
API basetype properties 413