CLI Guide

Table 122. system-parameters-table properties (continued)
Name Type Description
max-ar-vols-allowed uint32 The maximum number of virtual replication volumes that the system supports.
ar-sets-in-use-count uint32 The number of virtual replication volumes present in the system.
linear-replication-configured string Not applicable.
linear-replication-configured-
numeric
uint32 Not applicable.
virtual-replication-configured string
• False: No virtual replication sets exist on the system.
• True: At least one virtual replication set exists on the system.
virtual-replication-configured-
numeric
uint32 Numeric equivalents for virtual-replication-configured values.
• 0: False
• 1: True
max-adapt-drives-per-disk-
group
uint32 The maximum number of disks that an ADAPT disk group can contain.
min-adapt-drives-per-disk-
group
uint32 The minimum number of disks that an ADAPT disk group can contain.
max-adapt-disk-groups-per-
system
uint32 The maximum number of ADAPT disk groups that the system supports.
max-adapt-drives-per-expansion uint32 The maximum number of disks by which an ADAPT disk group can be expanded.
tasks
This basetype is used by show tasks.
Table 123. tasks properties
Name Type Description
name string Task name.
type string Type of operation this task performs.
• TakeSnapshot
• ResetSnapshot
• Replicate
• EnableDSD
• DisableDSD
status string Task status.
• Uninitialized: Task is not yet ready to run.
• Ready: Task is ready to run.
• Active: Task is running.
• Error: Task has an error.
• Complete: For a TakeSnapshot task only, the task is complete but not yet ready to
run again.
• Deleted: The task is expired but this state is not yet synchronized to the partner
controller.
state string Current step of the task.
• For an EnableDSD or DisableDSD task:
○ Start
• For a TakeSnapshot task:
API basetype properties 407