CLI Guide

Table 118. storage-preview properties (continued)
Name Type Description
spares-preview Embedded; see spares-preview on page 399.
unused-disks-preview Embedded; see unused-disks-preview on page 413.
support-assist
This basetype is used by show support-assist.
Table 119. support-assist properties
Name Type Description
support-assist-state string The current state of SupportAssist:
• Disabled
• Running
• Paused
support-assist-state-numeric uint32 Numeric equivalents for support-assist-state values:
• 0: Disabled
• 1: Running
• 2: Paused
support-assist-operation-mode string The SupportAssist operation mode.
• Normal: The service is operating normally.
• Maintenance: Maintenance mode is automatically enabled during maintenance
activities such as a firmware update or a user-initiated controller restart. In addition,
a user can put the system into maintenance mode manually to notify SupportAssist
not to create support tickets during planned system downtime.
support-assist-operation-mode-
numeric
uint32 Numeric equivalents for support-assist-operation-mode values.
• 0: Maintenance
• 1: Normal
last-logs-send-status string The status of the last SupportAssist logs upload.
last-logs-send-time string The date and time of the last SupportAssist logs upload.
last-logs-send-time-numeric uint32 Unformatted last-logs-send-time value.
last-event-send-status string The status of the last SupportAssist event upload.
last-event-send-time string The date and time of the last SupportAssist event upload.
last-event-send-time-numeric uint32 Unformatted last-logs-send-time value.
last-event-send-status string The status of the last SupportAssist event upload.
last-event-send-time string The date and time of the last SupportAssist event upload.
last-event-send-time-numeric uint32 Unformatted last-event-send-time value.
proxy-information Embedded; see proxy-information on page 376.
contact-information Embedded; see contact-information on page 293.
402 API basetype properties