CLI Guide

Table 112. snapshots properties (continued)
Name Type Description
• 0xa000: Volume-copy snapshot. Snapshot that is being used to copy data from a
source volume to a destination volume.
user_priority-value string User-defined retention priority for the snapshot type.
snapshot-type string Snapshot type.
• Standard snapshot : Snapshot of a source volume that consumes a snapshot
license.
snapshot-type-numeric uint64 Numeric equivalents for snapshot-type values.
• 0x00004000: Standard snapshot
• 0x00000000: N/A
storage-type string
• Linear : Linear pool.
• Virtual : Virtual pool.
storage-type-numeric uint64 Numeric equivalents for storage-type values.
• 0: Linear
• 1: Virtual
total-size string The total size of the snapshot.
total-size-numeric uint64 Unformatted total-size value in blocks.
snapshot-with-retention-tasks
This basetype is used by show tasks on page 244 for a TakeSnapshot task.
Table 113. snapshot-with-retention-tasks properties
Name Type Description
master-volume-name string Source volume name.
master-volume- serial string Source volume serial number.
snapshot-prefix string A label to identify snapshots created by this task.
retention-count uint32 Number of snapshots to retain with this prefix. When a new snapshot exceeds this limit,
the oldest snapshot with the same prefix is deleted.
last-created string
• The name of the last snapshot created by the task.
• Blank if the task has not created a snapshot.
snapshot Embedded; see snap-tasks on page 398.
snap-tasks
This basetype is used by show schedules on page 232, and show tasks on page 244 for a task that has created at least
one snapshot.
Table 114. snap-tasks properties
Name Type Description
snapshot-name string Snapshot name.
snapshot-serial string Snapshot serial number.
398 API basetype properties