CLI Guide

Table 109. shutdown-status properties (continued)
Name Type Description
• 0: up
• 1: down
• 2: not installed
sideplanes
This basetype is used by show enclosures on page 191.
Table 110. sideplanes properties
Name Type Description
durable-id string Sideplane ID.
enclosure-id uint32 Enclosure ID.
drawer-id
(5U84 enclosure)
uint8
• 0 : Top
• 1 : Bottom
drawer-id
(2U12/24 enclosure)
uint8 Not applicable ( 255 ).
dom-id uint32 The sideplane position, shown as an index value that starts at 0 and increments from
left to right as viewed from the back of the enclosure.
path-id string
• A : Controller A.
• B : Controller B.
path-id-numeric uint32 Numeric equivalents for path-id values.
• 0: B
• 1: A
name string Sideplane name.
location string Sideplane location.
position string Sideplane position, as viewed from the front of the enclosure.
• Left
• Right
position-numeric uint32 Numeric equivalents for position values.
• 0: Left
• 1: Right
status string Sideplane status.
• Unsupported
• OK
• Critical
• Warning
• Unrecoverable
• Not Installed
• Unknown
• Unavailable
status-numeric uint32 Numeric equivalents for status values.
394 API basetype properties