CLI Guide

Table 92. redundancy properties (continued)
Name Type Description
• Operational but not redundant : In active-active mode, one controller is
operational and the other is offline. In single-controller mode, the controller is
operational.
• Down : Thi s controller is not operational.
• Unknown: Status information is not available.
redundancy-status-numeric uint32 Numeric equivalents for redundancy-status values.
• 0: Redundant with independent cache
• 3: Operational but not redundant
• 4: Down
• 5: Unknown
controller-a-status string
• Operational : The controller is operational.
• Down : The controller is installed but not operational.
• Not Installed : The controller is not installed.
controller-a-status-numeric uint32 Numeric equivalents for controller-a-status values.
• 0: Operational
• 1: Down
• 2: Not Installed
controller-a-serial-number string
• Controller module serial number
• Not Available : The controller is down or not installed.
controller-b-status string
• Operational : The controller is operational.
• Down : The controller is installed but not operational.
• Not Installed : The controller is not installed.
controller-b-status-numeric uint32 Numeric equivalents for controller-b-status values.
• 0: Operational
• 1: Down
• 2: Not Installed
controller-b-serial-number string
• Controller module serial number
• Not Available : The controller is down or not installed.
other-MC-status string The operational status of the Management Controller in the partner controller. This is
not factored into system health.
• Not Communicating
• Not Operational
• Operational
• Unknown
other-MC-status-numeric uint32 Numeric equivalents for other-mc-status values.
• 1524: Not Communicating
• 3231: Not Operational
• 4749: Operational
• 1496: Unknown
refresh-counters
This basetype is used by show refresh-counters (Deprecated) on page 227
API basetype properties
379