CLI Guide

Table 86. power-supplies properties
Name Type Description
durable-id string Power supply ID in the format psu_enclosure-ID.power-supply-number.
enclosure-id uint32 Enclosure ID.
dom-id uint32 The power supply position, shown as an index value that starts at 0 and increments
from left to right as viewed from the back of the enclosure.
serial-number string Power supply serial number.
part-number string FRU part number.
description string FRU long description.
name string Power supply identifier and location.
fw-revision string
• (blank): Not applicable.
• Firmware revision of the power supply.
revision string FRU hardware revision level.
model string Power supply model.
vendor string Power supply vendor.
location string Power supply location in the format Enclosure enclosure-ID - position , where
the position is as viewed from the back of the enclosure.
position string Power supply position, as viewed from the back of the enclosure.
• Left
• Right
• Top
• Bottom
position-numeric uint32 Numeric equivalents for position values.
• 0: Left
• 1: Right
• 2: Top
• 3: Bottom
dash-level string FRU template revision number.
fru-shortname string FRU short description.
mfg-date string Date and time, in the format year-month-day hour:minutes:seconds (UTC),
when the power supply module was manufactured.
mfg-date-numeric uint32 Unformatted mfg-date value.
mfg-location string City, state/province, and country where the FRU was manufactured.
mfg-vendor-id string JEDEC ID of the FRU manufacturer.
configuration-serialnumber string Configuration serial number.
dc12v uint32 Deprecated; power-supply sensor status is shown by the sensors on page 390 property.
dc5v uint32
dc33v uint32
dc12i uint32
dc5i uint32
dctemp uint32
374 API basetype properties