CLI Guide

Table 85. port properties (continued)
Name Type Description
controller string
• A : Controller A.
• B : Controller B.
controller-numeric uint32 Numeric equivalents for controller values.
• 0: B
• 1: A
port string Controller ID and port number.
port-type string
• FC : Fibre Channel.
• iSCSI : Internet SCSI.
• SAS : Serial Attached SCSI.
port-type-numeric uint32 Numeric equivalents for port-type values.
• 0: UNKNOWN
• 6: FC
• 8: SAS
• 9: iSCSI
media string
• FC(P) : Fibre Channel Point-to-Point.
• FC(L) : Fibre Channel-Arbitrated Loop (public or private).
• FC(-) : Not applicable, as when the port is disconnected.
• SAS : Serial Attached SCSI.
• iSCSI : Internet SCSI.
target-id string
• For an FC port, its WWPN.
• For a SAS port, its WWPN.
• For an iSCSI port, its node name (typically the IQN).
status string Port status.
• Up : The port is cabled and has an I/O link.
• Warning : Not all of the port's PHYs are up.
• Error : The port is reporting an error condition.
• Not Present : The controller module is not installed or is down
• Disconnected : Either no I/O link is detected or the port is not cabled.
status-numeric uint32 Numeric equivalents for status values.
• 0: Up
• 1: Warning
• 2: Error
• 3: Not Present
• 6: Disconnected
actual-speed string Actual link speed in Mbit/s or Gbit/s.
• 10Mb
• 100Mb
• 1Gb
• 4Gb
• 6Gb
• 8Gb
• 12Gb
• 16Gb
• (blank): Port is disconnected.
372 API basetype properties