CLI Guide

Table 84. pools properties (continued)
Name Type Description
• 3: RCON
• 4: VRFY
• 5: EXPD
• 6: VRSC
• 7: DRSC
• 9: VREMV
• 12: VPREP
• 13: VDRAIN
• 14: VRECV
•
16: RBAL
preferred-owner string Controller that owns the disk group and its volumes during normal operation.
• A: Controller A.
• B: Controller B.
preferred-owner-numeric uint32
Numeric equivalents for preferred-owner values.
• 0: B
• 1: A
owner string Current owner, which is either the preferred owner during normal operation or the
partner controller when the preferred owner is offline.
• A: Controller A.
• B: Controller B.
owner-numeric uint32 Numeric equivalents for owner values.
• 0: B
• 1: A
rebalance string For internal use only.
rebalance-numeric uint32 For internal use only.
migration string For internal use only.
migration-numeric uint32 For internal use only.
zero-scan string For internal use only.
zero-scan-numeric uint32 For internal use only.
idle-page-check string For internal use only.
idle-page-check-numeric uint32 For internal use only.
read-flash-cache string For internal use only.
read-flash-cache-numeric uint32 For internal use only.
metadata-vol-size string The size of the pool’s metadata volume, formatted to use the current base, precision,
and units. This needs to be taken into consideration to account for all pages in the pool
that are used.
metadata-vol-size-numeric uint64 Unformatted metadata-vol-size value in blocks.
total-rfc-size string The total size in blocks of the read cache in the pool.
total-rfc-size-numeric uint64 Unformatted total-rfc-size value in blocks.
available-rfc-size string The unused read-cache space in blocks that is available for use by the pool.
available-rfc- size-numeric uint64 Unformatted available-rfc-size value in blocks.
370 API basetype properties