CLI Guide

Table 64. io-modules properties (continued)
Name Type Description
• Top
• Bottom
position-numeric uint32 Numeric equivalents for position values.
• 0: Left
• 1: Right
• 2: Top
• 3: Bottom
rotation string Rotation of the controller module in the enclosure.
• 0 Degrees
• 90 Degrees
• 180 Degrees
• 270 Degrees
rotation-numeric string Numeric equivalents for position values.
• 0: 0 Degrees
• 1: 90 Degrees
• 2: 180 Degrees
• 3: 270 Degrees
configuration-serialnumber string Configuration serial number.
phy-isolation string Shows whether the automatic disabling of SAS expander PHYs having high error counts
is enabled or disabled for this controller.
• Enabled: PHY fault isolation is enabled.
• Disabled: PHY fault isolation is disabled.
phy-isolation-numeric uint32 Numeric equivalents for phy-isolation values.
• 0: Enabled
• 1: Disabled
locator-led string Shows the state of the locator LED on an expansion module.
• Off
• On
locator-led-numeric uint32 Numeric equivalents for locator-led values.
• 0: Off
• 1: On
status string
• Operational
• Down
• Not installed
• Unknown
status-numeric uint32 Numeric equivalents for status values.
• 0: Operational
• 1: Down
• 2: Not installed
• 3: Unknown
health string
• OK
API basetype properties 353