CLI Guide

Table 58. host-group-view properties
Name Type Description
durable-id string Host group ID.
serial-number string The serial number of the host group.
group-name string The name of the host group in the format host-group.*.*, where the first *
represents all hosts in the group and the second * represents all initiators in those
hosts.
host-view-mappings Embedded; see host-view-mappings on page 350.
host-port-statistics
This basetype is used by show host-port statistics on page 203.
Table 59. host-port-statistics properties
Name Type Description
durable-id string Host port ID in the format hostport_controller-ID-and-port-number.
bytes-per-second string The data transfer rate, in bytes per second, calculated over the interval since these
statistics were last requested or reset. This value will be zero if it has not been
requested or reset since a controller restart.
bytes-per-second-numeric uint64 Unformatted bytes-per-second value.
iops uint32 Input/output operations per second, calculated over the interval since these statistics
were last requested or reset. This value will be zero if it has not been requested or reset
since a controller restart.
number-of-reads uint64 Number of read operations since these statistics were last reset or since the controller
was restarted.
number-of-writes uint64 Number of write operations since these statistics were last reset or since the controller
was restarted.
data-read string Amount of data read since these statistics were last reset or since the controller was
restarted.
data-read-numeric uint64 Unformatted data-read value.
data-written string Amount of data written since these statistics were last reset or since the controller was
restarted.
data-written-numeric uint64 Unformatted data-written value.
queue-depth uint32 The number of pending I/O operations currently being serviced.
avg-rsp-time uint32 Average response time in microseconds for read and write operations, calculated over
the interval since these statistics were last requested or reset.
avg-read-rsp-time uint32 Average response time, in microseconds, for all read operations, calculated over the
interval since these statistics were last requested or reset.
avg-write-rsp-time uint32 Average response time, in microseconds, for all write operations, calculated over the
interval since these statistics were last requested or reset.
reset-time string Date and time, in the format year-month-day hour:minutes:seconds, when
these statistics were last reset, either by a user or by a controller restart.
reset-time-numeric uint32 Unformatted reset-time value.
start-sample-time string Date and time, in the format year-month-day hour:minutes:seconds, when
sampling started for the iops and bytes-per-second values.
start-sample-time-numeric uint32 Unformatted start-sample-time value.
API basetype properties 349