CLI Guide

fru-versions
This basetype is used by show versions on page 258 when the frus parameter is specified.
Table 55. fru-versions properties
Name Type Description
enclosure-id uint32 The enclosure ID.
midplane-versions Embedded; see midplane-versions on page 362.
expander-versions Embedded; see expander-versions on page 340.
fan-module- versions Embedded; see fan-module-versions on page 344
psu-versions Embedded; see psu-versions on page 377.
host
This basetype is used by show host-groups on page 201.
Table 56. host properties
Name Type Description
durable-id string Host ID.
name string The name of the host.
serial-number string The serial number of the host.
member-count uint32 The number of initiators in the host.
host-group uint32 If the host is a member of a host group, the serial number of the host group. Otherwise,
UNGROUPEDHOSTS.
group-key string If the host is a member of a host group, the durable ID of the host group. Otherwise,
HGU.
initiator Embedded; see initiator on page 350.
host-group
This basetype is used by show host-groups on page 201.
Table 57. host-group properties
Name Type Description
durable-id string Host group ID.
name string The name of the host group.
serial-number string The serial number of the host group.
member-count uint32 The number of hosts in the host group.
host Embedded; see host on page 348.
host-group-view
This basetype is used by show maps on page 208 when the initiator parameter is specified.
348
API basetype properties