CLI Guide

Table 52. fc-port properties (continued)
Name Type Description
sfp-part-number string The SFP part number.
sfp-revision string The SFP revision.
sfp-supported-speeds string The link speeds that the SFP supports.
sfp-supported-speeds-numeric uint32 Numeric equivalents for sfp-supported-speeds values.
fde-state
This basetype is used by show fde-state on page 198.
Table 53. fde-state properties
Name Type Description
fde-security-status string Shows whether the system is secured or unsecured:
• Unsecured: The system has not been secured with a passphrase.
• Secured, Lock Ready: The system has been secured and lock keys have been
cleared. The system will become locked after the next power cycle.
• Secured, Locked: The system is secured and the disks are locked to data
access, preventing their use.
fde-security-status-numeric uint32 Numeric equivalents for fde-security-status values.
• 1: Unsecured
• 2: Secured
• 3: Secured, Lock Ready
• 4: Secured, Locked
lock-key-id string Current lock ID.
import-lock-key-id string The previous or import lock ID.
fde-config-time string If the system is secured, the time at which the current lock ID was set in the format
year-month-day hour:minutes:seconds (UTC).
fde-config-time-numeric uint32 Unformatted fde-config-time value.
fenced-data
This basetype is used by show fenced-data on page 198.
Table 54. fenced-data properties
Name Type Description
volume string The volume name for which fenced data is reported.
volume-serial string The volume serial number for which fenced data is reported.
volume-lba string The LBA in the volume at which fenced data is reported.
virtual-disk string The name of the disk group for which fenced data is reported.
virtual-disk-serial string The serial number of the disk group for which fenced data is reported.
virtual-disk-lba string The LBA in the disk group at which fenced data is reported.
API basetype properties 347