CLI Guide

Table 51. fan-modules properties (continued)
Name Type Description
• 4: Unknown
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended action to take to resolve the health issue.
unhealthy-component Embedded; see unhealthy-component on page 412.
fan-details Embedded; see fan on page 342.
fc-port
This basetype is used by show ports on page 219 for a Fibre Channel port.
Table 52. fc-port properties
Name Type Description
configured-topology string Configured topology.
• Loop : Fibre Channel arbitrated loop (public or private).
• PTP : Fibre Channel point-to-point.
• Auto : Loop preferred, otherwise point-to-point, based on the detected connection
type.
configured-topology-numeric uint32 Numeric equivalents for configured-topology values.
• 0: Loop
• 1 : PTP
• 2: Auto
primary-loop-id string If the port is using loop topology and the port status is Up, this field shows the primary
loop ID. If the port is not using loop topology or the port status is not Up, this field
shows N/A.
sfp-status string SFP status.
• OK
• Not present : No SFP is inserted in this port.
• Not compatible : The SFP in this port is not qualified for use in this system.
When this condition is detected, event 464 is logged.
• Incorrect protocol : The SFP protocol does not match the port protocol.
When this condition is detected, event 464 is logged.
sfp-status-numeric uint32 Numeric equivalents for sfp-status values.
• 0 : Not compatible
• 1 : Incorrect protocol
• 2 : Not present
• 3 : OK
sfp-present string Shows whether the port contains an SFP.
• Not Present
• Present
sfp-present-numeric uint32 Numeric equivalents for sfp-present values.
• 0: Not Present
• 1: Present
sfp-vendor string The SFP vendor.
346 API basetype properties