CLI Guide

Table 49. fan properties (continued)
Name Type Description
• 0: Left
• 1: Right
• 6: N/A
serial-number string
• (blank): Not applicable.
part-number string
• (blank): Not applicable.
fw-revision string
• (blank): Not applicable.
• Firmware revision of a fan FRU.
hw-revision string
• (blank): Not applicable.
locator-led string Shows the state of the locator LED on a fan unit.
• Off
• On
locator-led-numeric uint32 Numeric equivalents for locator-led values.
• 0: Off
• 1: On
health string
• OK
• Degraded
• Fault
• N/A
• Unknown
health-numeric uint32 Numeric equivalents for health values.
• 0: OK
• 1: Degraded
• 2: Fault
• 3: N/A
• 4: Unknown
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended actions to take to resolve the health issue.
fan-module-versions
This basetype is used by show versions on page 258 when the frus parameter is specified.
Table 50. fan-module-versions properties
Name Type Description
name string Fan name in the format fan_enclosure-ID.fan-number.
location string Fan location in the format Enclosure enclosure-ID - position. The position is as
viewed from the back of the enclosure.
enclosure-id uint32 Enclosure ID.
fan-module-id uint8 Fan module ID.
fw-revision string Fan firmware version.
cfg-crc string CFG CRC.
344 API basetype properties