CLI Guide

Table 49. fan properties (continued)
Name Type Description
• OK
• Critical
• Warning
• Unrecoverable
• Not Installed
• Unknown
• Unavailable
status-ses-numeric uint32 Numeric equivalents for status-ses values.
• 0: Unsupported
• 1: OK
• 2: Critical
• 3: Warning
• 4: Unrecoverable
• 5: Not Installed
• 6: Unknown
• 7: Unavailable
extended-status hex32 A numeric value that provides additional information to supplement the standard SES
status shown by the status and status-numeric properties. The extended-
status value is a bitwise value computed from the values of five status bits, and may
be one of the following values or a combination of these values.
• 1: The device has reported a failure.
• 2: The device is off.
• 4: The device FRU is not installed.
• 8: The device status cannot be determined.
• 16: The device is requested to be on (not off). This is the default status and
represents normal operation.
• 17: Device has failed.
• 18: Device is off.
• 19: Device has failed and is off.
• 24: Device status is unknown, which could represent an I2C communication issue.
status string Fan unit status.
• Up
• Error
• Off
• Missing
status-numeric uint32 Numeric equivalents for status values.
• 0: Up
• 1: Error
• 2: Off
• 3: Missing
speed uint32 Fan speed (revolutions per minute).
position string Fan position, as viewed from the back of the enclosure.
• Left
• Right
• N/A
position-numeric uint32 Numeric equivalents for position values.
API basetype properties 343