CLI Guide

Table 43. enclosure properties (continued)
Name Type Description
emp-a string Shows the field name EMP A in console format.
emp-a-ch-id-rev string SCSI address and firmware revision of controller A EMP.
emp-b string Shows the field name EMP B in console format.
emp-b-ch-id-rev string SCSI address and firmware revision of controller B EMP.
midplane-type string An abbreviation that describes the enclosure midplane's rack-unit height, maximum
number of disks, maximum data rate to disks (Gbit/s), and hardware version.
midplane-type-numeric uint32 Numeric equivalents for midplane-type values.
midplane-rev uint8 Midplane revision number.
enclosure-power string Enclosure power in watts.
pcie2-capable string
• False: Enclosure is not capable of using PCI Express version 2.
• True: Enclosure is capable of using PCI Express version 2.
pcie2-capable-numeric uint32 Numeric equivalents for pcie2-capable values.
• 0: False
• 1: True
health string
• OK
• Degraded
• Fault
• Unknown
• N/A
health-numeric uint32 Numeric equivalents for health values.
• 0: OK
• 1: Degraded
• 2: Fault
• 3: Unknown
• 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended actions to take to resolve the health issue.
unhealthy-component Embedded; see unhealthy-component on page 412.
drawer Embedded; see drawers on page 322.
controllers Embedded; see controllers on page 295, io-modules on page 352.
power-supplies Embedded; see power-supplies on page 373.
fan-modules Embedded; see fan-modules on page 345.
fan-details Embedded; see fan on page 342.
events
This basetype is used by show events on page 192.
API basetype properties
337