CLI Guide

Table 36. drawers properties (continued)
Name Type Description
• 3: Bottom
rows uint8 Number of rows of disk slots.
columns uint8 Number of columns of disk slots.
slots uint8 Number of disk slots in drawer.
number-of-disks uint8 Number of disk slots (not installed disks) in drawer.
emp-a-busid string SCSI channel ID of Enclosure Management Processor (EMP) A in the Expander
Controller of a drawer.
emp-a-targetid string SCSI target ID of Enclosure Management Processor (EMP) A in the Expander
Controller of a drawer.
emp-a-rev string Firmware revision of Enclosure Management Processor (EMP) A in the Expander
Controller of a drawer.
emp-b-busid string SCSI channel ID of Enclosure Management Processor (EMP) B in the Expander
Controller of a drawer.
emp-b-targetid string SCSI target ID of Enclosure Management Processor (EMP) B in the Expander
Controller of a drawer.
emp-b-rev string Firmware revision of Enclosure Management Processor (EMP) B in the Expander
Controller of a drawer.
emp-a string Shows the field name EMP A in console format.
emp-a-ch-id-rev string Channel ID and firmware revision of Enclosure Management Processor A in the
Expander Controller of a drawer.
emp-b string Shows the field name EMP B in console format.
emp-b-ch-id-rev string Channel ID and firmware revision of Enclosure Management Processor B in the
Expander Controller of a drawer.
locator-led string Shows the state of the locator LED on a drawer:
• Off
• On
locator-led-numeric uint32
Numeric equivalents for locator-led values.
• 0: Off
• 1: On
status string Drawer status.
• Unsupported
• OK
• Critical
• Warning
• Unrecoverable
• Not Installed
• Unknown
• Unavailable
status-numeric uint32 Numeric equivalents for status values.
• 0: Unsupported
• 1: OK
• 2: Critical
• 3: Warning
API basetype properties 323