CLI Guide

Table 30. disk-groups-preview properties (continued)
Name Type Description
tier-numeric uint32 Numeric equivalents for storage-tier values.
• 0: N/A
• 1: Permance
• 2: Standard
• 4: Archive
• 8: Read Cache
enclosure-id string Enclosure ID.
disk-count unit32 Number of disks in the disk group.
disk-display string The disks that would be used, listed as hyphenated disk ranges where possible to aid
readability (e.g., 1.1-12,...). If the list exceeds 60 characters, see the full list shown by
disk-display-full.
disk-display-full string The disks that would be used, listed individually (e.g., 1.1,1.2,...).
disk-group-statistics
This basetype is used by show disk-group-statistics on page 177.
Table 31. disk-group-statistics properties
Name Type Description
serial-number string The serial number of the disk group.
name string The name of the disk group.
time-since-reset uint32 The amount of time, in seconds, since these statistics were last reset, either by a user
or by a controller restart.
time-since-sample uint32 The amount of time, in milliseconds, since this set of statistics was last sampled by the
Storage Controller.
number-of-reads uint64 Number of read operations since these statistics were last reset or since the controller
was restarted.
number-of-writes uint64 Number of write operations since these statistics were last reset or since the controller
was restarted.
data-read string Amount of data read since these statistics were last reset or since the controller was
restarted.
data-read-numeric uint64 Unformatted data-read value.
data-written string Amount of data written since these statistics were last reset or since the controller was
restarted.
data-written-numeric uint64 Unformatted data-written value.
bytes-per-second string The data transfer rate, in bytes per second, calculated over the interval since these
statistics were last requested or reset. This value will be zero if it has not been
requested or reset since a controller restart.
bytes-per-second-numeric uint64 Unformatted bytes-per-second value.
iops uint32 Input/output operations per second, calculated over the interval since these statistics
were last requested or reset. This value will be zero if it has not been requested or reset
since a controller restart.
avg-rsp-time uint32 Average response time in microseconds for read and write operations, calculated over
the interval since these statistics were last requested or reset.
318 API basetype properties