CLI Guide

Table 29. disk-groups properties (continued)
Name Type Description
unhealthy-component Embedded; see unhealthy-component on page 412.
disk-groups-preview
This basetype is used by add storage on page 35 when the preview parameter is specified.
Table 30. disk-groups-preview properties
Name Type Description
name string The name of the disk group.
pool string The name of the pool that contains the disk group.
type string Disk description.
• SAS: Enterprise SAS spinning disk.
• SAS MDL: Midline SAS spinning disk.
• SSD SAS: SAS solid-state disk.
type-numeric uint32 Numeric equivalents for description values.
• 4: SAS
• 8: SSD SAS
• 11: SAS MDL
size string Disk group capacity, formatted to use the current base, precision, and units.
raidtype string The RAID level of the disk group.
• NRAID
• RAID0
• RAID3
• RAID5
• RAID6
• RAID10
• RAID50
• ADAPT
raidtype-numeric uint32 Numeric equivalents for raidtype values.
• 0 : RAID0
• 1 : RAID1
• 2 : ADAPT
• 3: RAID3
• 5 : RAID5
• 6: NRAID
• 8: RAID50
• 10: RAID10
• 11: RAID6
tier string
• Archive: The disk group is in the lowest storage tier, which uses midline spinning
SAS disks (<10k RPM, high capacity).
• Performance: The disk group is in the highest storage tier, which uses SSDs (high
speed).
• Read Cache: The disk is an SSD providing high-speed read cache for a storage
pool.
• Standard: The disk group is in the storage tier that uses enterprise-class spinning
SAS disks (10k/15k RPM, higher capacity)
API basetype properties 317