CLI Guide

Table 29. disk-groups properties (continued)
Name Type Description
read-ahead-enabled string Deprecated.
read-ahead-enabled-numeric uint32 Deprecated.
write-back-enabled string Deprecated.
write-back-enabled-numeric uint32 Deprecated.
job-running string Same as current-job.
current-job string Job running on the disk group, if any.
• DRSC: A disk is being scrubbed.
• EXPD: The disk group is being expanded.
• INIT: The disk group is initializing.
• RBAL: The ADAPT disk group is being rebalanced.
• RCON: At least one disk in the disk group is being reconstructed.
• VDRAIN: The virtual disk group is being removed and its data is being drained to
another disk group.
• VPREP: The virtual disk group is being prepared for use in a virtual pool.
• VRECV: The virtual disk group is being recovered to restore its membership in the
virtual pool.
• VREMV: The disk group and its data are being removed.
• VRFY: The disk group is being verified.
• VRSC: The disk group is being scrubbed.
• Blank if no job is running.
current-job-numeric uint32 Numeric equivalents for current-job values.
• 0: (blank)
• 2: INIT
• 3: RCON
• 4: VRFY
• 5: EXPD
• 6: VRSC
• 7: DRSC
• 9: VREMV
• 12: VPREP
• 13: VDRAIN
• 14: VRECV
• 16: RBAL
current-job-completion string
• 0%–99%: Percent complete of running job.
• (blank): No job is running (job has completed).
num-array-partitions uint32 Number of volumes in the disk group.
largest-free-partition-space string The largest contiguous space in which a volume can be created. The value is formatted
to use the current base, precision, and units.
largest-free-partition-space-
numeric
uint64 Unformatted largest-free-partition-space value in blocks.
num-drives-per-low-level-array uint8
• For a RAID-10 or RAID-50 disk group, the number of disks in each subgroup.
• For other RAID levels, 1.
num-expansion-partitions uint8 Not used.
num-partition-segments uint8 Number of free segments available for expansion of volumes.
314 API basetype properties