CLI Guide

Table 14. code-load-readiness properties (continued)
Name Type Description
code-load-readiness-reasons Embedded; see code-load-readiness-reasons on page 292.
code-load-readiness-reasons
This basetype is used by check firmware-upgrade-health on page 37.
Table 15. code-load-readiness-reasons properties
Name Type Description
readiness-reason string The condition that was detected.
failure-risks string The problems that are likely to result if you do not resolve the conditions before
performing a firmware upgrade.
failure-risks-numeric uint32 Numeric equivalents for failure-risks values.
communication-ports
This basetype is used by show protocols on page 222.
Table 16. communication-ports properties
Name Type Description
ssh-port uint16 The port number used for SSH.
sftp-port uint16 The port number used for SFTP.
compact-flash
This basetype is used by show controllers on page 170.
Table 17. compact-flash properties
Name Type Description
durable-id string
• Ctlr A CF: CompactFlash card in controller A.
• Ctlr B CF: CompactFlash card in controller B.
controller-id string
• A: Controller A.
• B: Controller B.
controller-id-numeric uint32 Numeric equivalents for controller-id values.
• 0: B
• 1: A
name string
• Controller A CompactFlash
• Controller B CompactFlash
status string
• Not Installed
• Installed
status-numeric uint32 Numeric equivalents for status values.
• 0: Not Installed
• 1: Installed
292 API basetype properties