CLI Guide

Table 7. advanced-settings-table properties (continued)
Name Type Description
• 1: Enabled
temperature-exceeded string Shows whether the system will shut down a controller when its temperature exceeds
the critical operating range.
• Disabled: The over-temperature trigger is disabled.
• Enabled: The over-temperature trigger is enabled.
temperature-exceeded-numeric uint32 Numeric equivalents for temperature-exceeded values.
• 0: Disabled
• 1: Enabled
partner-notify string Shows whether the partner controller will be notified when a trigger condition occurs.
• Disabled: Notification is disabled. The partner controller will continue using its
current caching mode.
• Enabled: Notification is enabled. The partner controller will change to write-
through mode for better data protection.
partner-notify-numeric uint32 Numeric equivalents for partner-notify values.
• 0: Disabled
• 1: Enabled
auto-write-back string Shows whether the cache policy will change from write-through to write-back when
the trigger condition is cleared.
• Disabled: Auto-write-back is disabled.
• Enabled: Auto-write-back is enabled.
auto-write-back-numeric uint32 Numeric equivalents for auto-write-back values.
• 0: Disabled
• 1: Enabled
disk-dsd-enable string Shows whether spinning disks that are available or are global spares will spin down after
a period of inactivity shown by the disk-dsd-delay property.
• Disabled: Drive spin down for available disks and global spares is disabled.
• Enabled: Drive spin down for available disks and global spares is enabled.
disk-dsd-enable-numeric uint32 Numeric equivalents for disk-dsd-enable values.
• 0: Disabled
• 1: Enabled
disk-dsd-delay uint16 Specifies the period of inactivity in minutes after which spinning disks that are available
or are global spares will spin down, from 1 to 360 minutes. The value 0 means spin down
is disabled.
background-disk-scrub string Shows whether disks that are not in disk groups are automatically checked for disk
defects to ensure system health. The interval between background disk scrub finishing
and starting again is 72 hours.
• Disabled: Background disk scrub is disabled.
• Enabled: Background disk scrub is enabled.
background-disk-scrub-numeric uint32 Numeric equivalents for background-disk-scrub values.
• 0: Disabled
• 1: Enabled
284 API basetype properties