CLI Guide

create replication-set
delete replication-set
resume replication-set
set replication-set
show replication-sets
test
Description Sends a test message to configured destinations for event notification and managed logs. After issuing this
command, verify that the test message reached its destinations.
Minimum role manage
Syntax
test
email|managedlogs|managedlogswarn|managedlogswrap|notification|snmp [region
crash1|crash2|crash3|crash4|ecdebug|mc|scdebug]
Output
email|managedlogs|managedlogswarn|managedlogswrap|notification|snmp
email: This option behaves the same as the notification option and remains for backward compatibility
only.
managedlogs: Specify this option to test receipt of the managed-logs notification that logs need to be
transferred. (Event 400)
managedlogswarn: Specify this option to test receipt of the managed-logs notification that logs are
nearly full and must be transferred to avoid losing older entries. (Event 401)
managedlogswrap: Specify this option to test receipt of the managed-logs notification that logs have
wrapped and older entries may be lost. (Event 402)
notification: Specify this option to test receipt of event-notification messages by every interface
that is configured to receive them, such as email, SNMP, and SMI-S. (Event 312)
snmp: This option behaves the same as the notification option.
region crash1|crash2|crash3|crash4|ecdebug|mc|scdebug
Optional. For use with the managed logs feature, this parameter specifies the log type (debug-data region)
for which to send notifications.
crash1, crash2, crash3, or crash4: Specify one of these options to send notification for one of the
Storage Controller’s four crash logs.
ecdebug: Specify this option to send notification for the Expander Controller log.
mc: Specify this option to send notification for the Management Controller log.
scdebug: Specify this option to send notification for the Storage Controller log, which includes the event
log.
If this parameter is omitted, the command sends four representative log types: crash1, ecdebug,
scdebug, and mc.
Examples
Test receipt of event notifications by every interface that is configured to receive them.
# test notification
Test receipt of the managed-logs notification that the Storage Controller log needs to be transferred.
# test managedlogs region scdebug
See also
set email-parameters
set ntp-parameters
268 Alphabetical list of commands