CLI Guide

The average response time in microseconds for all read operations, calculated over the interval since these
statistics were last requested or reset.
Write Resp Time
The average response time in microseconds for all write operations, calculated over the interval since these
statistics were last requested or reset.
Reset Time
The date and time, in the format yyyy-mm-dd hh : mm : seconds, when these statistics were last reset, either
by a user or by a controller restart.
Historical
Name
The name of the disk group.
Serial Number
The serial number of the disk group.
Data Transferred
The total amount of data read and written since the last sampling time.
Total B/s
The data transfer rate, in bytes per second, for read and write operations since the last sampling time.
Sample Time
The date and time, in the format yyyy-mm-dd hh : mm : seconds, when the data sample was taken.
Historical, all
Name
The name of the disk group.
Serial Number
The serial number of the disk group.
Data Transferred
The total amount of data read and written since the last sampling time.
Data Read
Shown by the all parameter. The amount of data read since the last sampling time.
Data Written
Shown by the all parameter. The amount of data written since the last sampling time.
Total B/s
The data transfer rate, in bytes per second, since the last sampling time. This is the sum of Read B/s and
Write B/s.
Read B/s
Shown by the all parameter. The data transfer rate, in bytes per second, for read operations since the last
sampling time.
Write B/s
Shown by the all parameter. The data transfer rate, in bytes per second, for write operations since the last
sampling time.
Sample Time
The date and time, in the format yyyy-mm-dd hh : mm : seconds, when the data sample was taken.
Examples
Show live statistics for linear disk groups VD1 and MyVdisk.
# show vdisk-statistics VD1,MyVdisk
Show historical statistics from a specified date and time range for linear disk group VD2.
Alphabetical list of commands 257