CLI Guide

• x: The user can access the Storage Management Initiative Specification (SMI-S) interface.
• (blank): The user cannot access this interface.
SNMP
• U: The user can access the SNMPv3 interface and view the MIB.
• (blank): The user cannot access this interface.
• T: The user can access the SNMPv3 interface and receive trap notifications.
Authentication Type
• MD5: MD5 authentication.
• SHA: SHA-1 authentication.
• none: No authentication.
Privacy Type
• DES: Data Encryption Standard.
• AES: Advanced Encryption Standard.
• none: No encryption.
Password
The user password. For a standard user the password is represented by eight asterisks. For an SNMPv3 user
this is the authentication password.
Privacy Password
The encryption password for an SNMPv3 user whose privacy type is set to DES or AES.
Trap Host Address
SNMP trap destination for an SNMPv3 user that can receive trap notifications.
Examples
Show information about all users.
# show users
Show information about user JSmith.
# show users JSmith
As a user with the manage role, show information—including SNMP passwords—for SNMPv3 user Traps.
# show users Traps show-snmp-password
Base types
users
status
See also
create user
delete user
set user
show vdisks
Description
Shows information about all or specified linear disk groups. This command applies to linear storage only.
Minimum role monitor
Syntax
show vdisks
[vdisks]
Parameters
vdisks
Optional. A comma-separated list of the names or serial numbers of the linear disk groups to show
information about. A name that includes a space must be enclosed in double quotes.
Output
Name
252 Alphabetical list of commands