CLI Guide

For the current run, the date and time when the replication is estimated to end.
Run Error
A message that says whether the replication succeeded or an error occurred.
Examples Show information about all replication sets.
# show replication-sets
Show information about replication set RS1.
# show replication-sets RS1
Basetypes
cs-replication on page 302
cs-replication-set
status
See also
create replication-set
delete replication-set
resume replication-set
set replication-set
suspend replication-set
show replication-snapshot-history
Description
Shows information about the snapshot history for all replication sets or a specific replication set.
You can run this command on either the primary or secondary system to see snapshot-history settings for a
replication set and details about local replication snapshots.
In console mode, this command does not show the serial numbers of items such as replication volumes. To
see serial numbers, run this command in API mode.
Minimum role monitor
Syntax
show replication-snapshot-history
[replication-set-ID]
Parameters
replication-set-ID
Optional. The name or serial number of a replication set for which to display information. A name that includes
a space must be enclosed in double quotes. If this parameter is omitted, information is shown for all
replication sets.
Output
Snapshot settings:
Replication Set
The replication set name.
Snapshot History
• disabled or off: A snapshot history will not be kept.
• secondary: A snapshot history set will be kept on the secondary system for the secondary volume,
using snapshot-count and snapshot-basename settings.
• both: A snapshot history will be kept for the primary volume on the primary system and for the
secondary volume on the secondary system. Both snapshot histories will use the same snapshot-
count and snapshot-basename settings.
Count
The number of snapshots to retain in snapshot history. When a new snapshot exceeds this limit, the oldest
snapshot in the snapshot history is deleted.
230 Alphabetical list of commands