CLI Guide

Pool (v3)
Pool name.
Vdisk (v2)
Disk group name.
Health
• OK
• Degraded
• Fault
•
N/A
• Unknown
Mapped
Indicates whether the volume is mapped. This is useful when the no-mapping parameter is specified to hide
detailed mapping information.
• Yes: The volume is mapped.
• No: The volume is not mapped.
Mapping information:
Ports
• Controller host ports that the mapping applies to.
• Blank if not mapped or mapped as no-access. .
LUN
• LUN that identifies the volume to a host.
• Blank if not mapped or mapped as no-access.
Access
Type of host access to the volume:
• read-write: The host has read and write access to the volume.
• read-only: The host has read access to the volume.
• no-access: The host is denied access to the volume.
• not-mapped: The host is not mapped to the volume.
Host-Port-Identifier (v2) or Identifier (v3)
• For an FC initiator, its WWPN. For a SAS initiator, its WWPN. For an iSCSI initiator, its node name
(typically the IQN).
• all other initiators: The volume's default mapping.
Nickname
Host nickname, or blank if not set or for all other hosts.
Profile
Standard: Default profile.
Examples
Show provisioning for the system.
# show provisioning
Show provisioning for disk group myR1.
# show provisioning vdisks myR1
Show provisioning for all unhealthy disk groups.
# show provisioning unhealthy
Basetypes
provisioning
status
Alphabetical list of commands 225