CLI Guide

Standard: Default profile.
Serial Number
The serial number of the volume group or volume.
Volume
• For a volume, its name.
• For a volume group, its name in the format volume-group.*, where the * represents all volumes in the
group.
Examples Show mappings for all volumes.
# show maps
Show mapping information for all initiators.
# show maps initiator
Show mappings for volume group VGroup1 and ungrouped volume v1.
# show maps VGroup1.*,v1
Basetypes
initiator-view
host-group-view
host-view-mappings
volume-group-view
volume-group-view-mappings
volume-view
volume-view-mappings
status
See also
show host-groups
show initiators
show volume-groups
show volumes
show network-parameters
Description
Shows the settings and health of each controller module’s network port
Minimum role monitor
Syntax
show network-parameters
Output
IP Address
The network port IP address.
Gateway
The network port gateway IP address.
Subnet Mask
The network port IP subnet mask.
MAC Address
The controller’s unique Media Access Control address.
Addressing Mode
• Manual: Network settings are set manually (statically).
210 Alphabetical list of commands