CLI Guide

• Media Access Control (MAC) address
• Network port
Examples Show inquiry data for controller modules in the system.
# show inquiry
Basetypes
inquiry
status
See also
show versions
show ipv6-addresses
Description Shows static IPv6 addresses assigned to each controller's network port.
Minimum role monitor
Syntax
show ipv6-addresses
[controller a|b|both]
Parameters
controller a|b|both
Optional. Specifies whether to show addresses for controller A, controller B, or both. If this parameter is
omitted, information is shown for both controllers.
Output
Ctlr
The controller ID: A or B.
Index
The controller's index value for the address. The index is automatically assigned when adding a static IPv6
address.
Label
The name assigned to the address, or ‘-’ if the address is unnamed.
Address
The IPv6 address with prefix length.
Examples Show static IPv6 addresses assigned to controller A.
# show ipv6-addresses controller a
Base types
ipv6-network-parameters
status
See also
add ipv6-address
remove ipv6-address
set ipv6-network-parameters
show ipv6-network-parameters
show ipv6-network-parameters
Description
Shows the IPv6 settings and health of each controller module's network port.
Minimum role monitor
Syntax
show ipv6-network-parameters
206 Alphabetical list of commands