CLI Guide

The JEDEC ID (global manufacturing code) of the manufacturer.
FRU Location
The location of the FRU in the enclosure.
Configuration SN
The configuration serial number.
FRU Status
• Absent: The FRU is not present.
• Fault: The FRU’s health is Degraded or Fault.
• Invalid Data: The FRU ID data is invalid. The FRU’s EEPROM is improperly programmed.
• OK: The FRU is operating normally.
• Power OFF: The FRU is powered off.
Original SN
For a power supply module, the original manufacturer serial number. Otherwise, N/A.
Original PN
For a power supply module, the original manufacturer part number. Otherwise, N/A.
Original Rev
For a power supply module, the original manufacturer hardware revision. Otherwise, N/A.
Enclosure ID
The enclosure number
Examples
Show information about all FRUs in the system.
# show frus
Basetypes
enclosure-fru
status
show host-groups
Description
Shows information about host groups and hosts. The command will show information for all host groups (and
hosts) by default, or you can use parameters to filter the output.
Minimum role monitor
Syntax
show host-groups
[hosts hosts]
[groups host-groups]
Parameters
hosts hosts
Optional. A comma-separated list of the names of hosts for which to show host and initiator information. If
this parameter is omitted, information is shown for all hosts. A value that includes a space must be enclosed
in double quotes.
groups host-groups
Optional. A comma-separated list of the names of host groups for which to show host-group, host, and
initiator information. If this parameter is omitted, information is shown for all host groups. A value that
includes a space must be enclosed in double quotes.
Output
Host group information:
Name
The name of the host group.
Alphabetical list of commands 201