CLI Guide

The number of the drawer.
Name
The name of the drawer.
Status
Status of the drawer
• Up
• Warning
• Error
• Unknown
• Unavailable
• Not Present
Health
• OK
• Degraded
• Fault
• N/A
• Unknown
Reason
If Health is not OK, this field shows the reason for the health state.
Action
If Health is not OK, this field shows recommended actions to take to resolve the health issue.
Examples
Show information about all enclosures in the system.
# show enclosures
Basetypes
enclosures
status
See also
set enclosure
show sensor-status
show events
Description
Shows events logged by each controller in the storage system. A separate set of event numbers is
maintained for each controller. Each event number is prefixed with a letter identifying the controller that
logged the event.
Events are listed from newest to oldest, based on a timestamp with one-second granularity. Therefore the
event log sequence matches the actual event sequence within about one second.
Minimum role monitor
Syntax
show events [a|b|both|error]
[detail]
[from timestamp]
[from-event event-ID]
[last #]
[logs yes|no]
[to timestamp]
192 Alphabetical list of commands