CLI Guide

Shown by default or by the detail parameter.
• AVAIL: Available.
• DEDICATED SP: The disk is a spare assigned to a linear disk group.
• FAILED: The disk is unusable and must be replaced. Reasons for this status include: excessive media
errors, SMART error, disk hardware failure, or unsupported disk.
• GLOBAL SP: The disk is a global spare.
• LEFTOVR: The disk is a leftover.
• LINEAR POOL: The disk is a member of a linear disk group.
• UNUSABLE: The disk cannot be used in a disk group. Possible reasons include:
○ The system is secured and the disk is data locked with a different passphrase.
○ The system is secured/locked (no passphrase available) and the disk is data/locked.
○ The system is secured and the disk is not FDE capable.
• UNUSABLE: The disk cannot be used in a disk group because the disk is from an unsupported vendor.
• VDISK: The disk is a member of a linear disk group.
• VDISK SP: The disk is a spare assigned to a linear disk group
• VIRTUAL POOL: The disk is a member of a disk group in a virtual pool.
Vdisk (v2)
Shown by default or by the detail parameter. The name of the disk group that contains the disk.
Vendor
Shown by default and by any parameter except temp. The vendor of the disk.
Examples
Show disk information.
# show disks
Show disk-slot information.
# show disks encl
Show disk performance statistics.
# show disks perf
Show Full Disk Encryption information.
# show disks fde
Show disk temperature information.
# show disks temp
Show detailed information for disk 1.1:
# show disks 1.1 detail
Show information about available disks only:
# show disks usage available
Basetypes
drives
enclosure-list
status
See also
show disk-groups
show vdisks
show disk-statistics
Description
Shows live or historical performance statistics for disks. For disk performance statistics, the system samples
live data every 15 seconds and historical data every quarter hour, and retains historical data for 6 months.
184 Alphabetical list of commands